CHFWR - CLEARSEAL 6

Product Identification

Product ID:CLEARSEAL 6
MSDS Date:10/01/1985
FSC:8030
NIIN:00-007-8334
MSDS Number: CHFWR

Responsible Party
CROSSFIELD PRODUCTS CORP
3000 E HARCOURT ST
COMPTON, CA 90221
US

Emergency Phone: 213-636-0561

Info Phone: 213-636-0561

Cage: 60782

Contractor
CROSSFIELD PRODUCTS CORP.
COMPTON, CA 90221 US

Telephone: 310-886-9100

Cage: 60782

Ingredients

ACRYLIC POLYMER

OSHA PEL N/K

ACGIH TLV: N/K


ETHANOL, 2-(2-ETHOXYETHOXY)-; (2-(2-ETHOXY ETHOXYL)

CAS: 111-90-0

RTECS: KK8750000

Fraction By Weight: 3.5%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MAY CAUSE EYE IRRITATION AND
SKIN RASH. CHRONIC: NOT KNOWN. MATERIAL NOT EXPECTED TO HAVE ANY
CHRONIC EFFECTS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NOT KNOWN.

First Aid

First Aid:INHAL: MOVE SUBJECT TO FRESH AIR IF NECESSARY. EYES: FLUSH
WITH WATER FOR AT LEAST 15 MINUTES. CALL MD IF IRRITATION PERSISTS.
SKIN: WASH WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING.
INGEST: IND UCE VOMITING AND CALL MD.

Fire Fighting

Extinguishing Media:DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIAL CAN SPATTER IF HEATED ABOVE
212F. POLYMER FILM CAN BURN.

Accidental Release

Spill Release Procedures:COAGULATE MATERIAL BY ADDING FERRIC CHLORIDE
AND LIME. ABSORB ONTO SAND OR PERLITE FOR SMALL SPILLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN COOL PLACE. AVOID FREEZING.
DO NOT HEAT ABOVE 200F.
Other Precautions:MATERIAL WILL COAGULATE IF HEATED RAPIDLY. EYE
PROTECTION SHOULD BE WORN.

Exposure Controls

Respiratory Protection:NONE IF GOOD VENTILATION MAINTAINED. IF NOT
NIOSH APPROVED RESPIRATOR.
Ventilation:LOCAL EXHAUST: YES. MECHANICAL: YES.
Protective Gloves:CHEMICAL RESISTANT OR RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
PROTECTIVE CLOTHING OR EQUIPMENT AS REQUIRED TO PREVENT SKIN
CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:212F,100C
Vapor Pres:AS WATER
Vapor Density:AS WATER
Spec Gravity:1.02 (H*2O=1)
Evaporation Rate & Reference:AS WATER
Solubility in Water:COMPLETELY MISCIBLE
Appearance and Odor:MILKY WHITE LIQUID; MILD ACRYLIC AND AMMONIA ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
AVOID ACIDS; WILL CAUSE MATERIAL TO COAGULATE.
Stability Condition to Avoid:AVOID FREEZING; DO NOT HEAT ABOVE 200F.
Hazardous Decomposition Products:IF BURNED: CARBON MONOXIDE,
HYDROCARBON GASES, BLACK SMOKE.

Disposal

Waste Disposal Methods:SANITARY LANDFILL IN ACCORDANCE WITH LOCAL,
STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.